Auto Light Cover

Auto Light Cover

The following is about Auto Light Cover related Auto Parts Mould ,I hope to help you better understand Auto Light Cover

Romela Inquiry

Tlhaloso ea Sehlahisoa



Mochine oa ho hatella

Mochine oa khatello ke khoebo e kholo ka ho fetisisa ea HC, mme re khethehile ka mochine oa SMC / BMC / GMT / LFT / HP-RTM ka lilemo tse fetang leshome.


SMC is sheet hlobo compound


SMC ke motsoako oa resine ea polymeri, kenya li-fillers, fiber reinforcement, catalyst, pigments, stabilizers, li-release, le li-thickeners. Ho hlahisoa ha SMC ke ts'ebetsong ea ts'ebetso e tsoelang pele.

This process produces high strength, complex parts in a wide variety of sizes. Matched metal dies are mounted in a hydraulic molding press. The material charge is manually or robotically placed in the mold; the heated mold halves are closed, and up to 2000 psi of pressure is applied. Cycle time ranges from one to five minutes, depending on part size and thickness. Features such as ribs, bosses and inserts can be molded in.

Compression molded fiberglass parts are characterized by net size and shape, two excellent finished surfaces, and outstanding parts-to-part repeatability. Trimming and finishing costs are minimal.

In-mold coatings and vacuum system in the tool are available to improve surface paint ability, eliminating the need for primer.

Meriana ea mebala e ka etsoa.

The advantage of SMC molding parts is as follows:

1. Good dimensional stability, including excellent thermal resisitance.

2. Pigmentable for molded-in color, best appearance with mold texture.

3. Excellent property retention in cold and hot environments.

4. Suitable for outdoor use in applications involving UV exposure and water.


 


BMC is bulk molding compound



BMC mold used a thermoset plastic made up of a polymer resin, various insert fillers, fiber reinforcement, catalysts, stabilizers, and pigments that form a viscous. It is highly filled and reinforced with short fibers.

BMC is available in bulk bags as well as slug form. The mixing operation can be done in a number of ways. There are three methods for combining glass with paste: a continuous screw mixer, a sigma blade mixer and a plough blade mixer. The process chosen is dependent upon specific product properties, product form and volume.

Ho itšetlehile ka tšebeliso ea tšebeliso ea ho qetela, lik'hemik'hale li hlophisitsoe ho finyella taolo e boima, matla a mollo, matla a dielectric a phahameng, kutu le ho hanyetsa mabala le botsitso ba 'mala. Litšobotsi tsa eona tse ntle tsa ho phalla li etsa hore sefubelu sa BMC se loketse hantle ho mefuta e sa tšoaneng ea likōpo tse hlokang ho nepahala ka ho qaqileng le litekanyo. Litaba tsena li fumaneha ka mebala e sa tšoaneng.

Besides, BMC mold is suitable for either compression molding or injection molding. Compressing molding of BMC is used to produce complex components such as electrical equipment, car components, housings for electrical appliances and tools, in large industrial volumes.



GMT ke Glass Mat e tsosolositsoengThermoplastics, a kind of sheet molding compound with fiber reinforced thermoplastic. It is produced on huge laminators, using a thermoplastic resin and one or more forms of reinforcement. The process yields a lightweight, partially consolidated, semifinished composite in sheet form. Most forms are produced to 1300mm to 1400 mm widths. However, some newer forms are made to greater but proprietary widths. The sheet stock may be cut to size to suit placement in the tool for a specific application and also can incorporate a decorative or functional surface laminated to one side. GMT hlobo makes possible the production of large parts with low tooling costs and fast cycle times via compression molding. The potential for parts consolidation presents the opportunity to further reduce weight and cost.

Monyetla oa likarolo tsa hlobo tsa GMT: tšebeliso ea khatello e tsosolositsoeng, e tlaase ea sebōpeho, nako e telele ea ho boloka, potoloho e khutšoanyane, mokhoa o phahameng oa tlhahiso.

GMT hlobo e sebelisoa haholo ka likoloi le kaho ea mohaho, indasteri ea lik'hemik'hale, thepa ea lipapali, thepa ea thepa, joalo-joalo.


 



LFT Mold (Long Fiber Thermoplastics)


LFT is bulk molding material that feature continuous fiber filaments running the full length of the pellet allowing these materials to exhibit simultaneous improvements in strength, stiffness, and impact resistance over a wide temperature range.

Meanwhile, D-LFT (Direct-long fiber thermoplastics) is available for injection or compression molding. Most D-LFT systems, feed glass roving into a twin-screw extruder (TSE), where it is chopped by the screws as it is mixed with molten polymer and additives that have been metered in separately. To improve surface finish, some systems use knives to prechop the roving prior to entrance into the TSE. This method generally yields a shorter fiber, while the direct roving feed produces long fibers and yields parts with higher structural performance.

The advantage of D-LFT mold is that it can reduce production cost by elimination of semi-finished products and logistical effort, and increase production flexibility.




Boemo ba Khoebo

Ho tloha ha ho thehoa ka 1996,Huacheng Molde fetisitse ISO9001 mme e buelloa hore e be se molemo ka ho fetisisaSMC/BMC/GMT/LFT/ LFI hlobo supplier in China. With the company philosophy of “Honesty, quality, and efficiency” which enable us to keep a long-term cooperation with our customers overseas. Having the capability of design and making hlobos according to European technical standards and quality level, Huacheng has become one of the pillars of the industry.

We have successful experience in making various kinds of hlobos for:


  • Li-Auto Parts: Bumper, engine hood, chassis, front panel, truck door, dashboard, lampshade,boto ea maoto, fender joalo-joalo.
  • Communication and Electric appliances: Electric meter box, cable branch box, transforming and distributing box, air-condition, satellite dish joalo-joalo.
  • Sanitary le Kitchenware: Bathtub, wash basin, sink, ceiling board, chassis, wallboard wainscot joalo-joalo.
  • Monyako: We have unique experience in making SMC/MDF/HDF doorskin hlobo with wood grain.
  • Lipalangoang: SMC Motor boat, SMC railway frame, train seat, roof, window frame and lavatory joalo-joalo.
  • Kaho:Water tank, septic-tank joalo-joalo.


The customers of Huacheng Mold are hohle lefatšeng, joalojoaloka Amerika, Italy, Malaysia,Thailand, Iran and so on. Our products enjoy the highest quality with the most reasonable price.


Hot Tags:

Sehlopha se amanang

Romela Inquiry

Ka kopo Ikutloe u lokolohile ho fana ka tlhahiso ea hau ka foromo e ka tlase. Re tla u araba ka lihora tse 24.
验证码,看不清楚?请点击刷新验证码