LFT-D Lesebelisuoa le ka morao la Lumpe

LFT-D Lesebelisuoa le ka morao la Lumpe

The following is about LFT D Rear Bumper Beam Mould related LFT Mould,I hope to help you better understand LFT D Rear Bumper Beam Mould

Romela Inquiry

Tlhaloso ea Sehlahisoa



Mochine oa ho hatella

Mochine oa khatello ke khoebo e kholo ka ho fetisisa ea HC, mme re khethehile ka mochine oa SMC / BMC / GMT / LFT / HP-RTM ka lilemo tse fetang leshome.


SMC ke letlapa la sebōpeho se entsoeng


SMC is a mixture of polymer resin, insert fillers, fiber reinforcement, catalyst, pigments, stabilizers, release agents, and thickeners. Manufacturing of SMC is a continuous in-line process.

This process produces high strength, complex parts in a wide variety of sizes. Matched metal dies are mounted in a hydraulic molding press. The material charge is manually or robotically placed in the mold; the heated mold halves are closed, and up to 2000 psi of pressure is applied. Cycle time ranges from one to five minutes, depending on part size and thickness. Features such as ribs, bosses and inserts can be molded in.

Likarolo tsa fiberglass tse entsoeng ka lik'hamphani li khetholloa ka boholo le sebōpeho sa marang-rang, likarolo tse peli tse babatsehang tsa ho qetela, le likarolo tse ikhethang-tse ling tsa ho pheta-pheta. Ho qeta le ho qeta litšenyehelo ha ho fokolang.

Li-coatings le li-vacuum tsamaiso ea lithulusi li fumaneha ho ntlafatsa bokhoni ba ho penta, ho felisa tlhokahalo ea ho qala.

Color compounds can be customized.

Molemo oa likarolo tsa SMC tsa ho etsa lintho tse latelang ke tse latelang:

1. Ho ba le botsitso bo botle ba lefats'e, ho kenyeletsa le ho ba le mefuta e metle ea lichelete.

2. Pigmentable for molded-in color, best appearance with mold texture.

3. Excellent property retention in cold and hot environments.

4. E loketse ho sebelisoa ka ntle ho lik'ebetsong tse amanang le ts'ebeliso ea UV le metsi.


 


BMC is bulk molding compound



BMC mold used a thermoset plastic made up of a polymer resin, various insert fillers, fiber reinforcement, catalysts, stabilizers, and pigments that form a viscous. It is highly filled and reinforced with short fibers.

BMC is available in bulk bags as well as slug form. The mixing operation can be done in a number of ways. There are three methods for combining glass with paste: a continuous screw mixer, a sigma blade mixer and a plough blade mixer. The process chosen is dependent upon specific product properties, product form and volume.

Depending on the end-use application, compounds are formulated to achieve tight dimensional control, flame resistance, high dielectric strength, corrosion and stain resistance and color stability. Its excellent flow characteristics make BMC mold well suited to a wide variety of applications requiring precision in detail and dimensions. The material is available in a wide variety of colors.

Ntle ho moo, hlobo ea BMC e loketse bakeng sa ho hatella kapa ho kenya mochine. Ho hatella sebōpeho sa BMC ho sebelisetsoa ho hlahisa likarolo tse rarahaneng tse kang lisebelisoa tsa motlakase, lisebelisoa tsa koloi, lisebelisoa tsa lisebelisoa tsa motlakase le lisebelisoa, litsing tse khōlō tsa indasteri.



GMT is Glass Mat Reinforced Thermoplastics, a kind of sheet molding compound with fiber reinforced thermoplastic. It is produced on huge laminators, using a thermoplastic resin and one or more forms of reinforcement. The process yields a lightweight, partially consolidated, semifinished composite in sheet form. Most forms are produced to 1300mm to 1400 mm widths. However, some newer forms are made to greater but proprietary widths. The sheet stock may be cut to size to suit placement in the tool for a specific application and also can incorporate a decorative or functional surface laminated to one side. GMT mould makes possible the production of large parts with low tooling costs and fast cycle times via compression molding. The potential for parts consolidation presents the opportunity to further reduce weight and cost.

The advantage of GMT mould parts: utilization of regenerated, low forming pressure, long storage period, short shaping cycle, high production efficiency.

GMT mold is mostly used in Automotive and building &construction, chemical industry, packaging, sport equipment, etc.


 



LFT Mold (Long Fiber Thermoplastics)


LFT is bulk molding material that feature continuous fiber filaments running the full length of the pellet allowing these materials to exhibit simultaneous improvements in strength, stiffness, and impact resistance over a wide temperature range.

Meanwhile, D-LFT (Direct-long fiber thermoplastics) is available for injection or compression molding. Most D-LFT systems, feed glass roving into a twin-screw extruder (TSE), where it is chopped by the screws as it is mixed with molten polymer and additives that have been metered in separately. To improve surface finish, some systems use knives to prechop the roving prior to entrance into the TSE. This method generally yields a shorter fiber, while the direct roving feed produces long fibers and yields parts with higher structural performance.

Molemo oa hlobo ea D-LFT ke hore o ka fokotsa litšenyehelo tsa tlhahiso ka ho felisoa ha lihlahisoa tse feliloeng ka bobeli le boiteko bo sebetsang, le ho eketsa phetoho ea tlhahiso.




Company Profile

Ho tloha ha ho thehoa ka 1996,Huacheng Mould has passed ISO9001 and was recommended to be the best SMC/BMC/GMT/LFT/ LFI mouldfana ka thepa Chaena. Ka filosofi ea k'hamphani ea "Botšepehi, boleng, le bokhoni" e re thusang ho boloka tšebelisano ea nako e telele le bareki ba rona mose ho maoatle. Ho ba le bokhoni ba ho qaptjoa le ho etsa li-molds ho ea ka litekanyetso tsa tekanyetso ea Europe le boleng ba boleng, Huacheng e fetohile e 'ngoe ea litšiea tsa indasteri.

Re na le phihlelo e atlehileng ho etsa mefuta e sa tšoaneng ea hlobo ea:


  • Auto Parts:Sekontiri, sekoti sa mochine, mochine oa mokokotlo, lehlakoreng le ka pele, monyako oa teraka, seteishene, lebone la lebone, foot board, fender etc.
  • Communication and Electric appliances: Electric meter box, cable branch box, transforming and distributing box, air-condition, satellitesejana etc.
  • Sanitary le Kitchenware: Bathtub, wash basin, teba, boto ea siling, mochine, ntlo ea maboteng joalo-joalo.
  • Door:Re na le phihlelo e ikhethang ka ho etsa hlobo ea SMC / MDF / HDF e nang le thollo ea lehong.
  • Transportation:SMC Sekepe sa motlakase, sesebelisoa sa seporo sa SMC, setulo sa terene, marulelong, fensetere ea lifensetere le liaparo tse ling.
  • Kaho:Water tank, septic-tank etc.


The customers ea Huacheng Mold keall over the world, such as America, Italy, Malaysia, Thailand, Iran le joalo-joalo. Our products enjoyboleng bo phahameng ka ho fetisisa ka theko e utloahalang ka ho fetisisa.


Hot Tags:

Sehlopha se amanang

Romela Inquiry

Ka kopo Ikutloe u lokolohile ho fana ka tlhahiso ea hau ka foromo e ka tlase. Re tla u araba ka lihora tse 24.
验证码,看不清楚?请点击刷新验证码