Compression mould is HC Mould's biggest business, and we specialized in SMC/BMC/GMT/LFT/HP-RTM mold for more than ten years.
SMC ke motsoako oa resine ea polymeri, kenya li-fillers, fiber reinforcement, catalyst, pigments, stabilizers, li-release, le li-thickeners. Ho hlahisoa ha SMC ke ts'ebetsong ea ts'ebetso e tsoelang pele.
This process produces high strength, complex parts in a wide variety of sizes. Matched metal dies are mounted in a hydraulic molding press. The material charge is manually or robotically placed in the mold; the heated mold halves are closed, and up to 2000 psi of pressure is applied. Cycle time ranges from one to five minutes, depending on part size and thickness. Features such as ribs, bosses and inserts can be molded in.
Likarolo tsa fiberglass tse entsoeng ka lik'hamphani li khetholloa ka boholo le sebōpeho sa marang-rang, likarolo tse peli tse babatsehang tsa ho qetela, le likarolo tse ikhethang-tse ling tsa ho pheta-pheta. Ho qeta le ho qeta litšenyehelo ha ho fokolang.
In-mold coatings and vacuum system in the tool are available to improve surface paint ability, eliminating the need for primer.
Meriana ea mebala e ka etsoa.
The advantage of SMC molding parts is as follows:
1. Good dimensional stability, including excellent thermal resisitance.
2. Pigmentable for molded-in color, best appearance with mold texture.
3. Molemo oa ho boloka matlo sebakeng se batang le se chesang.
4. Suitable for outdoor use in applications involving UV exposure and water.
BMC mold used a thermoset plastic made up of a polymer resin, various insert fillers, fiber reinforcement, catalysts, stabilizers, and pigments that form a viscous. It is highly filled and reinforced with short fibers.
BMC is available in bulk bags as well as slug form. The mixing operation can be done in a number of ways. There are three methods for combining glass with paste: a continuous screw mixer, a sigma blade mixer and a plough blade mixer. The process chosen is dependent upon specific product properties, product form and volume.
Ho itšetlehile ka tšebeliso ea tšebeliso ea ho qetela, lik'hemik'hale li hlophisitsoe ho finyella taolo e boima, matla a mollo, matla a dielectric a phahameng, kutu le ho hanyetsa mabala le botsitso ba 'mala. Litšobotsi tsa eona tse ntle tsa ho phalla li etsa hore sefubelu sa BMC se loketse hantle ho mefuta e sa tšoaneng ea likōpo tse hlokang ho nepahala ka ho qaqileng le litekanyo. Litaba tsena li fumaneha ka mebala e sa tšoaneng.
Ntle ho moo, hlobo ea BMC e loketse bakeng sa ho hatella kapa ho kenya mochine. Ho hatella sebōpeho sa BMC ho sebelisetsoa ho hlahisa likarolo tse rarahaneng tse kang lisebelisoa tsa motlakase, lisebelisoa tsa koloi, lisebelisoa tsa lisebelisoa tsa motlakase le lisebelisoa, litsing tse khōlō tsa indasteri.
GMT ke Glass Mat e tsosolositsoengThermoplastics, a kind of sheet molding compound with fiber reinforced thermoplastic. It is produced on huge laminators, using a thermoplastic resin and one or more forms of reinforcement. The process yields a lightweight, partially consolidated, semifinished composite in sheet form. Most forms are produced to 1300mm to 1400 mm widths. However, some newer forms are made to greater but proprietary widths. The sheet stock may be cut to size to suit placement in the tool for a specific application and also can incorporate a decorative or functional surface laminated to one side. GMT mould makes possible the production of large parts with low tooling costs and fast cycle times via compression molding. The potential for parts consolidation presents the opportunity to further reduce weight and cost.
Monyetla oa likarolo tsa hlobo tsa GMT: tšebeliso ea khatello e tsosolositsoeng, e tlaase ea sebōpeho, nako e telele ea ho boloka, potoloho e khutšoanyane, mokhoa o phahameng oa tlhahiso.
GMT mold is mostly used in Automotive and building &construction, chemical industry, packaging, sport equipment, joalo-joalo.
LFT is bulk molding material that feature continuous fiber filaments running the full length of the pellet allowing these materials to exhibit simultaneous improvements in strength, stiffness, and impact resistance over a wide temperature range.
Meanwhile, D-LFT (Direct-long fiber thermoplastics) is available for injection or compression molding. Most D-LFT systems, feed glass roving into a twin-screw extruder (TSE), where it is chopped by the screws as it is mixed with molten polymer and additives that have been metered in separately. To improve surface finish, some systems use knives to prechop the roving prior to entrance into the TSE. This method generally yields a shorter fiber, while the direct roving feed produces long fibers and yields parts with higher structural performance.
Molemo oa hlobo ea D-LFT ke hore o ka fokotsa litšenyehelo tsa tlhahiso ka ho felisoa ha lihlahisoa tse feliloeng ka bobeli le boiteko bo sebetsang, le ho eketsa phetoho ea tlhahiso.
Since established in 1996, Huacheng Molde fetisitse ISO9001 mme e buelloa hore e be se molemo ka ho fetisisaSMC/BMC/GMT/LFT/LFI mouldfana ka thepa Chaena. Ka filosofi ea k'hamphani ea "Botšepehi, boleng, le bokhoni" e re thusang ho boloka tšebelisano ea nako e telele le bareki ba rona mose ho maoatle. Ho ba le bokhoni ba ho qaptjoa le ho etsa li-molds ho ea ka litekanyetso tsa tekanyetso ea Europe le boleng ba boleng, Huacheng e fetohile e 'ngoe ea litšiea tsa indasteri.
Re na le phihlelo e atlehileng ho etsa mefuta e sa tšoaneng ea hlobo ea:
The customers of Huacheng Mold are hohle lefatšeng, joalojoaloka Amerika, Italy, Malaysia, Thailand, Iran and so on. Lihlahisoa tsa rona li thabela the highest quality with the most reasonable price.